Paper jams! A big frustration for all of us who use inkjet printers. Here’s a few tips to help prevent them.

Tip #1
Paper leaves dust on the rollers, and two sided paper leaves ink residue. To clean your rollers get a bottle of rubbing alcohol and some cotton swabs. Open your printer door and find a metallic bar with some rubber wheels on it. Those are the rollers. Gently place the cotton swab (with alcohol already on it) on the roller. Now, push the paper feed button on your printer and the rollers will begin moving. Let the cotton swab rub on the roller as it moves. Repeat this a few times for each roller.

Tip #2
Allow the paper to feed easier through the printer by leaving a 1/4″ gap between the paper tray guide and the paper in the tray.

Tip #3
Keep the paper more upright and closer to the feed rollers by placing a piece of stiff card stock in the paper feed tray. If you do this make sure you have plenty of paper in your printer so it does not try to pull the card stock through the printer.

Tip #4
Fan your stack of paper before placing it in to the paper tray. This separates the sheets, allowing for the feed rollers to pull a single piece easier. It also releases any excess dust on the paper.

Tip #5
Curl the edge of the first piece in the paper tray. The slight upward curl will help the feed rollers grab the paper easier.

Tip #6
If you are using heavier weight papers (more than 12ml thick) you should check to see if your printer has heavy paper settings. If so, use them! Your printer manual will have more information on this.

Happy Printing!

Disclaimer: These are just paper jam prevention tips, so we can’t assume liability if you use them. Damage could occur. We’ve been using these tips to prevent paper jams for years. So far no problems.