OSG Square End Mill: 5/8'' Dia, 1-1/4'' LOC, 5/8'' Shank Dia, 3-1/2'' OAL, 4 Flutes, Solid Carbide
$127.53 / EA
00650630 | 
Harvey Tool Ball End Mills; Mill Diameter (mm): 11.00 ; Number Of Flutes: 4 ; End Mill Material: Solid Carbide ; Length of Cut (mm): 32.0000 ; Shank Diameter (mm): 12.0000 ; Overall Length (mm): 75.0000
$131.53 / EA
00661850 | 
Harvey Tool Ball End Mills; Mill Diameter (mm): 2.50 ; Number Of Flutes: 4 ; End Mill Material: Solid Carbide ; Length of Cut (mm): 3.7000 ; Shank Diameter (mm): 3.0000 ; Overall Length (mm): 38.0000
$28.90 / EA
00661868 |
Harvey Tool Ball End Mills; Mill Diameter (mm): 7.00 ; Number Of Flutes: 4 ; End Mill Material: Solid Carbide ; Length of Cut (mm): 10.0000 ; Shank Diameter (mm): 8.0000 ; Overall Length (mm): 63.0000
$52.24 / EA
00666164 |
Harvey Tool Ball End Mills; Mill Diameter (mm): 7.00 ; Number Of Flutes: 4 ; End Mill Material: Solid Carbide ; Length of Cut (mm): 10.0000 ; Shank Diameter (mm): 8.0000 ; Overall Length (mm): 63.0000
$65.82 / EA
00666172 | 
US Union Tool Tapered End Mill: 2.5 deg Angle per Side, 10.00 mm Small Dia, 35.00 mm LOC, 4 Flute, Square End
$685.64 / EA
00671065 |
Value Collection Square End Mill: 3/8'' Dia, 1-1/2'' LOC, 3/8'' Shank Dia, 3-1/4'' OAL, 2 Flutes, Cobalt
$12.60 / EA
00676684 | 
Value Collection Square End Mill: 1/2 Dia, 2 LOC, 2 Flutes, Cobalt
$26.13 / EA
00676692 | 
US Union Tool Corner Radius and Corner Chamfer End Mills; Mill Diameter (mm): 2.00 ; Number Of Flutes: 4 ; Length of Cut (mm): 2.0000 ; End Mill Material: Solid Carbide ; Coating/Finish: Hardmax ; Centercutting: Yes
$138.13 / EA
00678383 |
Harvey Tool Ball End Mills; Mill Diameter (mm): 2.50 ; Number Of Flutes: 4 ; End Mill Material: Solid Carbide ; Length of Cut (mm): 3.7000 ; Shank Diameter (mm): 3.0000 ; Overall Length (mm): 38.0000
$35.94 / EA
00682294 |
Harvey Tool Ball End Mills; Mill Diameter (mm): 9.00 ; Number Of Flutes: 4 ; End Mill Material: Solid Carbide ; Length of Cut (mm): 13.0000 ; Shank Diameter (mm): 10.0000 ; Overall Length (mm): 75.0000
$78.91 / EA
00682302 | 
Helical Solutions Corner Radius and Corner Chamfer End Mills; Mill Diameter (Inch): 1/4 ; Mill Diameter (Decimal Inch): 0.2500 ; Number Of Flutes: 4 ; Length of Cut (Inch): 1 ; Single Or Double End: Single ; End Mill Material: Solid Carbide
$84.73 / EA
00682773 |
|
