Micro 100 Grooving Tool: Face
$93.85 / EA
15297559 | 
Micro 100 Boring Bar Sets; Shank Diameter (Inch): 3/16; 3/16 in; Minimum Bore Diameter - Smallest Bar (Decimal Inch): .120 in; Minimum Bore Diameter - Smallest Bar (Inch): .120; Minimum Bore Diameter - Largest Bar (Decimal Inch): 0.1600 in; Minimum Bore Diameter -
$234.32 / EA
15302938 | 
Micro 100 Boring and Grooving Bar Holders; Inside Diameter (Inch): 1/4 ; Inside Diameter (Decimal Inch): 0.2500 ; Outside Diameter (Decimal Inch): 0.7500 ; Outside Diameter (Inch): 3/4 ; Overall Length (Decimal Inch): 5.8000 ; Head Diameter (Decimal Inch): 0.8750
$270.83 / EA
15308182 | 
Micro 100 Single-Point Tool Bit: GS-102002, 3/8 Shank Height, 3/8 Shank Width, Solid Carbide Tip, Neutral
$52.50 / EA
15328677 | 
Mitsubishi Boring and Grooving Bar Holders; UNSPSC Code: 27112809
$240.43 / EA
15926199 | 
Micro 100 Grooving Tool: Retaining Ring
$52.39 / EA
16029688 |
Micro 100 Tool Bit Blank: 5/16 Dia, 6 OAL, Solid Carbide, Round
$80.93 / EA
16500266 | 
Micro 100 Grooving Tool: Retaining Ring
$61.57 / EA
16694572 | 
Micro 100 5/16 ID x 25mm OD Quick Change Boring and Grooving Bar Holders
$268.83 / EA
16695801 |
Micro 100 3/16 ID x 1/2 OD Quick Change Boring and Grooving Bar Holders
$191.16 / EA
16697997 | 
Micro 100 Boring Bar: 0.196 Min Bore, 3/8 Max Depth, Right Hand Cut, Solid Carbide
$66.25 / EA
17623083 | 
Micro 100 Boring Bar: 1/2 Max Depth, Right Hand, 1/8 Shank Dia, Solid Carbide
$44.11 / EA
17623414 |
|
